VAG DPF 6f6n6l
DPF particulate filter status of your TDI VW Audi Seat Skoda (see engine list) 2g1a3v
App info 5d333i
App description s1a4r
Android App Analysis and Review: VAG DPF, Developed by Daaren Fonloil. Listed in Auto & vehicles Category. Current Version Is 3.40.12, Updated On 09/12/2024 . According to s reviews on Google Play: VAG DPF. Achieved Over 49 thousand Installs. VAG DPF Currently Has 2 thousand Reviews, Average Rating 3.5 Stars
ATTENTION!! This app works only with VAG cars (Audi Volkswagen Seat Skoda Porsche) that are equipped with engines listed below; the full compatibility isn't guaranteed for engines not listed, so if you buy the app, please consider that some or all functions may not work properly.This app doesn't work with other brand's car due to a different diagnostic protocol.
VAG DPF forum: https://www.applagapp.com/forum/
VAG DPF F.A.Q.: https://www.applagapp.com/forum/viewtopic.php?f=9&t=319
VAG DPF shows you the most important information about the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter. With this app you can know if the regeneration process is currently running, if a regeneration is waiting to be completed, how many km have you traveled since last regeneration, etc. This app doesn't use standard OBD2 commands as most other apps, it uses CANBUS commands and this is the reason why it needs a decent ELM327 adapter to work (see the note below).
IMPORTANT!! Before to buy the full app, I suggest to try the app "VAG DPF Free" to check that your adapter, your Android device and your engine work properly with the app.
ed engines:
DETA, CRBC, CFHD,CUNA, CFFB, CFWA(*), CLHA, CXXB, CAYC (partially working on at 3C MY10), CAHA (beta, requires verification), CXHA, DTTC (not MY2022 and subsequent), CDUC
Engines tested successfully by s:
CFGB(*), CFGC, CJCA, CRMB, CUPA, CUSA, CXFA, CAYB, CAYD, CRLB, CUTA, CFHC, CAGA(*), CSHA, CJCD, DFSB, CLAB, DFLA, DCXA, CFCA, CGLC, CFJB, CFHA, CRUA, DDYA, DFFA, CRKB, DCYA, DFCA, CUUB, CGLB, CUAA, CUSB, CAPA(*), DFGA, DFSF, DFHA, CNHA, DGTA, DGTE(*), CCWA, DGDA, DLUB, CJCB, DGTD, CDUD, CSUD, DEUA, DAUA, DJGA, CXXA, DFEA, DBGC, CAYA, CRTD, DGDB, CUUA, DAVA, CKFC, CRCA, CGQB(*), DDDA, DCZA, CAAC, DNAA(*), CAAB, DTUA(§)
(*) = partial or depending on SW version
(§) = only for 11-bit init protocol
IMPORTANT some of the engines above may be incompatible, it depends on the engine software version, so use the VAG DPF FREE app to check your engine before buy!!!!
Some words about ELM327 adapters:
- OBDLink LX: recommended, expensive but fast and reliable (I used it for the app development)
- Carista: recommended, affordable price but very reliable (I use it for debug and daily scans)
- Vgate iCar 2 Bluetooth : recommended, same as Carista
- Konnwei kw 903 : recommended, same as Carista
- China cloned adapter: not recommended, unreliable, you can randomly find decent adapters or fake adapters with unpredictable results
29-bit init protocol: Currently the app doesn't the 29-bit protocol engines, but it's available the BETA engine group 97 that can be used for test, more details here:
https://www.applagapp.com/forum/viewtopic.php?f=4&t=20036&p=26560
What's New 4d631z
3.40.12
- improved INIT sequence
- corrected double-arrow refresh icon behavior
3.39.12 / 3.38.12
- updated engine group 97 BETA configuration
- bug fix
3.37.12
- updated engine group 97 BETA configuration
3.36.12
- new engine group 22 for DAVA engine with SW 9793 (thanks Des2653)
- improved INIT sequence
- corrected double-arrow refresh icon behavior
3.39.12 / 3.38.12
- updated engine group 97 BETA configuration
- bug fix
3.37.12
- updated engine group 97 BETA configuration
3.36.12
- new engine group 22 for DAVA engine with SW 9793 (thanks Des2653)
Recent Comments 5l362y
Joe Q 6x624g
Would be nice if it covered the CKRA. Would also be nice if there could be an ETA for next Regen in either time or milage. Could be listed as approximate ETA. Also for some of the values to add a max mark from corporate levels. lastly but not all I have for suggestions is to let use create our own interface like we can in the torque app. I would have 5 stars if our nms cars were covered.
Alex N 32r3v
The app is good and show the regeneration on time, but I have a question regarding Ash oil residue (g), I use 2 professional very good cleaning products, it's show me 116% with 92 g, 213000 miles. The question is why Ash oil residue is not going down after I use cleaning products? I have good consumption (50 mpg-long term) and no errors codes. Thank you!!
Barry Smith sw41
Fantastic app. I've spent the last 6 wks trying everything possible to unblock my dpf. Even trips to a garage. I wanted to see what was going on and why it wouldn't. Evenntually boom. It regened itself.
Dragos 4p3oj
I love this app. I use it for years for my Audi CAGA engine. Works perfectly with an iCar OBD scanner. One time payment is honest, no micro transaction cr@p here.
Tim Fisher 51542j
Very good app, but needs one improvement to be perfect. The value which shows the amount of soot increasing or decreasing per mile ( or km) needs colour coding, do that I can see at a glance without looking at the numbers. Eg white digits if it's decreasing (negative), and purple digits if it's increasing (positive). Even better would be if the picture of the filter was one colour when hot enough to burn off soot, bit another colour when the soot level is decreasing. Otherwise great !
A Google 1zq2i
I'm generally very pleased with the app but I am puzzled by the fact that it stops working after about an hour into a longer journey. No doubt there is a simple reason why this happens but the solution eludes me for the moment. Can you assist please Daaren? Update - all is working well now. Must have been a mistake on my part. UPDATE - definitely operator error! All now working well. Thanks for a great app!
Bartosz Prus 5u5a44
After the update, the VAG DPF is connected but showing errors, with a 2-second data lag. Engine: CFFB, OBD: Vgate. Before works absolutely fine.
jav 2m10c
Indespensible. Is there no option for 7 🌟's :) If you have a vag diesal and do mostly city driving, you have to have this app. Takes out the guess work of having to thrash the car on the motorway every couple of weeks. It will tell you when your car is regenerating so you don't turn off ignition,just keep driving to allow regen to take place. As well as soot levels it also gives reading on ash oil residue which can be a silent killer on dpf's. The developer deserves a medal. Well done.